logo

• 목록
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

메세지 내용

Why Buy a 10kg Front Loader?

The 10kg front loader is ideal for large loads of laundry with plenty of room for large wash cycles as well as 13 wash programs, including handwash. It's a smart machine with advanced features.

Front loaders are typically slower to wash and are not available with larger capacities, and 10kg front loader can suffer from mould or mildew. They are more energy and water efficient than top-loaders.

Energy

The main energy expense in the front loader with 10kg top loader washing machine of weight is the power used to heat water to operating temperatures, and for running the motor. These costs can be offset by a lower energy consumption when compared with top-loaders. This means less power required during the spin cycle and agitation and also using less water. Certain machines come with a low-water wash option which requires significantly less water than the cotton cycle, thereby saving on both energy and water consumption.

In general, front-loading washers use less soap than top-loaders. The drum's tumbling also reduces foamy suds and also reduces overflows, but without affecting the cleaning action. However, the door seals and bellows are more susceptible to wear than those found in top-loaders. In addition, the top-loader's mechanical agitator can cause significant wear and abrasion to clothes, since it forces clothes against each other with paddles that are constantly dropping and dragging them through the wash. The amount of abrasion is measured by the amount of fabric that is accumulated in the dryer's lint filters, as the majority of lint is fragments of fibers that are ripped from clothing during drying and washing. To minimize this, a lot of top-loaders are designed to run at a slower rate and may have a "freshening" cycle to clean the mechanical gears and bellows.

Water

Top-loading washers require an impeller or agitator to push soap and water through the clothes, causing mechanical wear and abrasion. In contrast, front-loaders employ paddles that gently lift and drop clothing inside a spinning drum for cleaning, which reduces wear. The rate of such wear can be estimated by the amount of lint accumulated in dryer lint filters, which consists of threads that are stray from clothes during drying and 10 kg washing machine.

Front-loading machines are less prone to leak since they have less water than top-loaders. True front-loaders may require a bellows seal or 10kg Front Loader seal to prevent water from getting out of the door during operation, but they do not typically need to be maintained as regularly as their counterparts on top-loaders.

Front-loaders are more energy-efficient than top-loaders since they can utilize hot or cold water, and some even do so without a heating source. This efficiency could reduce operating costs for the same laundry load in areas where energy, water, and detergents are expensive.